ISP & Telecom

ODN solutions for operators managing millions of connections

From FTTH large-scale rollout to metro fiber expansion and smart O&M — purpose-built for ISP and telecom operators who need standardized, repeatable, and cost-controlled deployment at scale.

Solution 01

FTTH Network Large-Scale Deployment

Million-home FTTH rollouts demand more than stacking boxes. This solution provides a three-layer architecture with standardized product families, modular design, and pre-terminated cabling — shifting deployment from "project-by-project" to "industrialized rollout."

ISP and telecom fiber deployment scenarios — large-scale FTTH network rollout, metro fiber expansion, intelligent O&M solutions, fiber distribution cabinets, and pre-terminated cabling for telecom operators

What this solves

Standardized product family — same specs, same install, every site

Multi-spec, multi-supplier chaos drives up procurement and training cost

Pre-terminated cabling: factory-tested, plug-and-play, 60% less field work

Inconsistent field splicing quality across projects

Standardized labeling + modular architecture — fault isolation in minutes

4–6 hour average fault location in ODN

Unified product family across all network layers, repeatable process

Each project needs different products and procedures

Three-layer architecture

Layer	Product	Core Spec
OLT (Central Office)	Optical Distribution Frame	Up to 576 fibers, 19" rack
ODN (Distribution)	Fiber Distribution Cabinet	12–144 ports, IP65, SMC
Subscriber Access	Fiber Splice Closure + FDB	IP68, wall/pole mount

Pre-terminated Deployment

Factory-spliced, factory-tested. Field work reduced 60%+, insertion loss ≤0.3dB (standard) / ≤0.15dB (low-loss).

Modular Expansion

Add capacity without replacing main equipment. Pre-allocated space and interfaces for network growth.

Cost Control at Scale

Standardized product family simplifies procurement. Volume pricing tiers reduce unit cost predictably.

Solution 02

Metro Fiber Distribution & Expansion

Metro networks face fiber exhaustion, expansion-caused outages, and routing chaos. This solution delivers hot-swap modular expansion, parallel cutover, and smart labeling — so you add capacity without breaking what already works.

Key capabilities

Hot-swap modular expansion

Add fiber capacity without service interruption. Module-level plug-and-play expansion for ODF and patch panels.

Parallel cutover strategy

New cables run alongside existing routes. Cutover in segments during off-peak windows. No big-bang risk.

Smart fiber labeling

RFID electronic tags (128-bit) on every port. Integrate with your asset management system for end-to-end route visibility.

Lossless equipment upgrade

Temporary bypass for critical services. Automatic failover <50ms. New and old systems run in parallel until cutover is verified.

Product selection

Scenario	Product	Key Spec
Central Office	Optical Distribution Frame	576–1152 fibers, FC/SC/LC
Aggregation Node	Fiber Distribution Cabinet	144 fibers, IP65, -25°C to +55°C
POP Point	Network Cabinet	12U/24U, standard 19" rack
Underground/Aerial	Fiber Splice Closure	24–96 fibers, IP68

Solution 03

Intelligent O&M & Management

ODN faults account for a disproportionate share of operator outages, and average fault location takes 4–6 hours. This solution upgrades the ODN layer from "passive and invisible" to "monitored and manageable" — with RFID tags, remote sensors, DCIM integration, and AI-assisted fault prediction.

Cloud–Edge–Device architecture

Cloud

OMS-Cloud Platform

Data aggregation, analytics, alerts, work orders, AI fault prediction

Edge

Communication Gateway

Protocol conversion, edge caching, store-and-forward for intermittent links

Device

Smart Sensors & RFID

Port status, environment monitoring, electronic tag read/write at every port

Why operators invest in smart O&M

Fault location

4–6 hours (manual) Minutes (automated)

Port utilization data

Manual audit, often stale Real-time, always current

Field inspection cost

Scheduled, regardless of status On-demand, only when alerted

Typical payback

— 1.5–2 years based on labor savings and fault reduction

Planning an FTTH rollout or network expansion?

Tell us your deployment scale, timeline, and existing infrastructure. We will recommend the right product mix and configuration — within 1 hour.

Request Solution Browse Products

Frequently Asked Questions

What are the core equipment requirements for FTTH deployment?

A complete FTTH deployment requires three core layers: the OLT layer at the central office using Optical Distribution Frames (up to 576 fibers), the ODN distribution layer with Fiber Distribution Cabinets (12-144 ports, IP65), and the subscriber access layer with Fiber Splice Closures and Fiber Distribution Boxes (IP68, wall or pole mount). Pre-terminated cabling reduces field work by 60% and ensures factory-tested insertion loss performance.

How do I choose the right split ratio for my FTTH network?

Split ratio selection depends on subscriber density, distance from the OLT, and target bandwidth per user. 1:32 is standard for urban residential areas within 10 km, providing good bandwidth per subscriber. 1:64 suits higher-density deployments where per-user bandwidth requirements are moderate. For rural or long-reach scenarios, 1:128 with lower-split first stages can extend reach beyond 20 km. Always calculate the optical power budget end-to-end before finalizing the ratio.

How can I optimize per-port cost in large-scale FTTH rollouts?

Standardize on a single product family across all network layers to reduce procurement complexity and enable volume pricing tiers. Use pre-terminated cabling to cut field labor costs by 60% and reduce splicing errors. Modular expansion design lets you add capacity without replacing main equipment, deferring capital expenditure to when it is needed. For million-home deployments, predictable unit costs and repeatable installation procedures are more valuable than spot discounts on individual SKUs.

Does Jergeo support large-scale FTTH projects for telecom operators?

Yes. Jergeo provides a unified product family covering all ODN layers from central office ODFs to subscriber terminal boxes with consistent specifications across the range. Pre-terminated options are factory-spliced and tested, with insertion loss of 0.3 dB or less standard or 0.15 dB or less low-loss. The product line supports modular expansion so operators can scale from pilot to million-home rollout without changing specifications or retraining field teams.